A great value for a great item. This is one of the most common failures that an A/C unit can have, and of course when they fail it's going to be blazing hot outside and all the local suppliers are closed for the day or weekend. The ability to get this same day or next day is great, but I actually prefer to keep one on hand. I am a bit of a boy scout in the aspect of liking to keep a few spare parts for the home appliances around, after a few failures over the years, I've determined that off something is going to break, it will be when everything is closed, or the one thing you need isn't in stock.The motor is good quality and universal so it will fit most all units. The wiring is just like any other universal, allowing you to change voltage and rotation via the jumpers. The shaft is nice and long so it will likely fit the deepest mounts, and they are designed to be cut off after install.Motor starts quietly and quickly, runs smooth and cool.

I recently had to replace the fan motor on my GE heat pump, and this motor was a perfect fit.Installation was a breeze, and I was able to swap it out in no time. The new motor's wire colors matched perfectly with the old one. Since I installed the new motor, my heat pump has been running like a champ.

Worked perfectly as a replacement. Runs cool, quiet and efficient.This one's got a slightly longer shaft (a few mm) than the old one, which didn't matter, it's still got plenty of clearance to the shroud.

Rpm 1100, just what i need.Volage upto 230, good. U5 uf, for capacitor, perfect!Hp is weird, it says 1/12.The one im using has hp 1/4,1/5With that said, this fan will has to draw more power. It will still work.In my opinion, The capacitor will work harder since it needs more crank start/power.To start the fan.Its a little bit thing. Nothing to worry, im just being to technical in numbers.

Good value, works great. Good quality materials. I would buy again.

When my ac started acting up I thought I was going to have to drop a few grand buying another unit but I had my buddy that works on ac units for a living take a look at it and all I needed was this motor. It was simple for him to install but if you don’t know about these things leave it to a professional as you can do dame if wired up wrong. Now I’m cool as a cucumber, I hope it lasts me for years to come!

Replaced my old condenser fan motor for my AC and it has worked well so far, I am not sure about its durability as I have just replaced it. If there are any problems in use, I will update my reviewed.

Old Maytag range would no longer bake. Oven gradually stopped heating. Part was easy to install (watched youtube). The oven temperature corrected. Cancelled the replacement Oven order which was delayed anyway. Happy we decided to do the repair ourselves.

The item was perfect. I have an Amana AGR5330BAS3. The original part had a 2 prong conector. I just cut the conector and attached it to the new part. It worked perfectly.I could've just remove the conector from the other wires and just connect the wires directly but I liked the conector.It shipped fast and it worked perfectly.

I was a bit concerned with the FakeSpot review "F", however, I'm always interested in supporting the small business so I took a chance. The igniter arrived fast (2 day shipping) was easy to install on my BlueStar oven and fired right up in 30 seconds. Nice blue flame. I just installed so I can't comment on the longevity, only time will tell. The original OEM lasted 3 years, so this one should outlast the 1 year warranty.

Not much to say here, my old igniter died slowly and I replaced it. Sadly, the first replacement (different brand) was DOA which made me think there was something else wrong. Nope, just a bad one I guess. Whatever, new one works a treat. There is no connector on this, just bare wire ends and ceramic wire nuts, but that's fine. I cut the pigtail off of the original and use the wire nuts to connect it up. Word of caution, I'd cut the tags off the wires before you install it. I left one on and it took a while before it burned off and stunk quite a lot until it did. Seems like a dumb idea to attach a flammable tag to a thing that makes fire for a living.

This was a quick fix once I actually got it in the mail. The only complaint I have was my expected shipping date changed 3 times and ended up being about a week later than expected once it did actually arrive. Life was tough without my oven for that long but once it did arrive it worked great and was an easy fix.

We bought this part because the first part that was sent to us was broken when it arrived. We just Installed this one today and it immediately sparked. We’ve gotten 2 faulty pieces from this manufacturer. Do not buy!

Better price than GE and fit just fine as a replacement. Oven died four days before Thanksgiving and this got here in time to do the repair.

Was exactly what we needed for my stove and super easy to replace

The major goof thing that you need to know is that everything fit my older whirlpool dryer perfectly and the price was amazingly cheaper that the OEM stuff that others are selling. NICE....

I knew when I got this kit that it probably wasn't going to be the quality of factory replacement parts and I was confirmed as soon as I installed the kit. The belt is thinner and narrower than factory and you have to do some engineering to install the idler roller. I am a retired appliance tech so I knew that for the money. I shouldn't expect much. Fortunately I open my dryer every 6 months for a thorough cleaning so I will spend the extra dollars and stick with factory replacement parts.

This was perfect for my dry everything fit

I bought this dryer repair kit for my Amana gas dryer 6 months ago. In my experience, the left idler wheel on this model tends to lock up every few months. I have no complaint about most of the parts in this kit, but the idler wheel I used for the left side is ruined after six months. It literally looks like I tried to tap threads into the bearing. The shaft I purchased separately cost $45 and is still good, apparently having been made of better steel. Overall, I would avoid this repair kit since the low quality idler wheels are the main component. As a general comment, do you remember when a dryer lasted 10 years or more before you had to do anything to it?

My Whirlpool gas dryer is ancient. It came with my house, and I seriously think it was made in the 80's. Luckily it uses pretty standard parts that were in a lot of other dryers and the only maintenance I think I've ever done on it is replacing the lint screen once, and replacing these roller/belt parts. I've done this once before, about 10 years ago and it's starting to get pretty noisy.Unfortunately, making room to tear my dryer apart is a pretty big project, and I haven't had the time to install this kit yet. If you've never done this, it's not difficult, but does require complete access to the front and top of the dryer. The top flips up and the front panel and drum are removed. My dryer is packed into the corner of a cramped utility room, so it's going to be a bigger project than it would be for others. That said, if you have an older dryer like mine, you might look into what other parts might need replacing while you have your dryer apart. When I'm ready to take on this project, I will probably order a felt drum seal and the foam seal for the lint trap as well.As for the quality of this repair kit, I see no issues with it. I'm sure when I did this repair last time, I bought the cheapest Chinesiest stuff I could find and it's still working after 10 years. Just noisy. By design, these parts don't have to be very fancy to last a very long time. As far as part numbers go, this seller has compiled a pretty good list of compatible part numbers accounted for in this kit. Sometimes you have to do a little research using your model number and some repair parts websites to be certain you're getting the right thing(s), especially when working on older appliances that have had their part numbers superseded 5-6 times, not to mention that appliances often use the same parts between different brand names that each have their own part numbers!

This is a wonderful kit and comes with everything you need to replace the rollers and belt on your Whirlpool/Kenmore/Maytag electric dryer. The instructions included are very helpful, but in my opinion leave two important notes out. One, leave the rear triangle clips alone if they are in good shape, they are a pain to put back in. Two, get help, it is much easier to put the belt on with someone supporting the drum for you, it also makes reinstalling the front panel easier. You can also "cheat" and use a small wooden wedge to open the tensioner pulley up while reconnecting the belt and then pull it out once the belt is around the motor pulley. It took me about 30 minutes to change everything out by myself. It might have been quicker if my dog quit trying to stick her head in the dryer every time I moved. All in all this fit my dryer perfectly and saved me a bunch of money from buying the parts from the appliance store.

the rollers wore out after one month.the idler pulley also was not great quality.when i checked my dryer to replace the rollers i noticed that the idler pulley was also bent down to one side.

My Whirlpool WGD4800BQ1 gas dryer began to have a horrible squealing sound. I didn't want to get a new dryer because the dryer still worked great, just the squeal. I got online and watched a few videos on how to repair such a squeal. I believe my squeal was coming from one of the wheels. The repair did not look difficult. This kit was under $25, and way cheaper than having a repairman come out. After confirming with the seller that this kit would fit my dryer (see my question posted and the seller's prompt response), I decided to give it a try. I replaced both wheels, the belt, and the pulley assembly. The whole repair took me about 40 minutes, and now my dryer is quiet and runs smoothly. This kit comes with easy to read instructions, and along with the videos out there, almost anyone could do this repair. Absolutely five stars!